SONIC DRY CLEANING SYSTEM
WHY OUR PATENTED SONIC DRY CLEANING SYSTEM WORKS BETTER
The two-stage process includes sonic vibration as the filter is rotated and air blown at precise angles dislodging any heavily compacted dirt or debris. The second stage uses compressed air to glance off the filter's media, not through it where damage could occur, but back against the original path of travel.
All the loosened particulate is quickly vacuumed out of the chamber into a contained waste collection system for easy disposal or product recovery.
TECHNOLOGY RESULTS IN A FILTER BETTER THAN NEW
A cartridge filter cleaning with this method is better than new! When first installed, a new filter is less than 100% efficient until it builds up a filtering shield know as the pre-coat. Most of the contaminants that pass through an air filter do so during the early part of the filter's life - - when filter efficiency is at its lowest.
Only after the 5%-20% of a filter's life passes does the filter develop the pre-coat. The pre-coat is formed when microscopic particles build up on the media surface – once formed the filter is capable of filtering target contaminants at 100% efficiency.
Unlike other methods, the Sonic Dry Clean process does not remove or damage the pre-coat. The engineered surface nozzles glance air off the filter at precise angles that completely clean the filter media without damaging the pre-coat.
With Phoenix Filter Cleaning Service, you will be re-installing a filter that performs better than new – resulting in less long-term wear and tear on your equipment.